Logging In To Another Device By Using Stelnet; Checking The Configuration - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations

8.4.4 Logging in to Another Device by Using STelnet

You can log in to the SSH server from the SSH client by using STelnet.
Context
When accessing an SSH server, the STelnet client can carry the source address and the VPN
instance name and choose the key exchange algorithm, encryption algorithm, or HMAC
algorithm, and configure the keepalive function.
Do as follows on the router that serves as an SSH client:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 According to the address type of the SSH server, select and run one of the following two
commands.
l For IPv4 addresses,
l For IPv6 addresses,
----End

8.4.5 Checking the configuration

After the configuration task of logging in to another device by using STelnet is established, you
can check the mappings between all SSH servers of the STelnet client and the RSA public keys
on the client, the global configurations of the SSH servers, and the sessions between the SSH
servers and the STelnet client.
Prerequisite
The configurations for logging in to another device by using STelnet are complete.
Issue 02 (2011-09-10)
Run the stelnet [ -a source-address ] host-ipv4 [ port ] [ [ -vpn-instance vpn-instance-
name ] | [ prefer_kex { dh_group1 | dh_exchange_group } ] | [ prefer_ctos_cipher
{ des | 3des | aes128 } ] | [ prefer_stoc_cipher { des | 3des | aes128 } ] |
[ prefer_ctos_hmac { sha1 | sha1_96 | md5 | md5_96 } ] | [ prefer_stoc_hmac { sha1 |
sha1_96 | md5 | md5_96 } ] ]
can log in to the SSH server through STelnet.
Run the stelnet ipv6 [ -a source-address ] host-ipv6 [ -i interface-type interface-number ]
[ port ] [ [ prefer_kex { dh_group1 | dh_exchange_group } ] | [ prefer_ctos_cipher
{ des | 3des | aes128 } ] | [ prefer_stoc_cipher { des | 3des | aes128 } ] |
[ prefer_ctos_hmac { sha1 | sha1_96 | md5 | md5_96 } ] | [ prefer_stoc_hmac { sha1 |
sha1_96 | md5 | md5_96 } ] ]
can log in to the SSH server through STelnet.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
*
[ -ki aliveinterval [ -kc alivecountmax ] ] command. You
*
[ -ki aliveinterval [ -kc alivecountmax ] ] command. You
8 Accessing Another Device
166