HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
12.5 (Optional) Unactivating the activating of Patch
If an installed patch does not take effect, you need to deactivate the patch.
12.5.1 Establishing the Configuration Task
Before deactivating a patch, familiarize yourself with the applicable environment, complete the
pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
Applicable Environment
After a patch is activated, you need to judge that the patch has achieved the expected effect. If
the patch does not become valid, you need to activate the patch.
A patch can be deactivated only after it is activated.
Pre-configuration Tasks
None
Data Preparation
None
12.5.2 Deactivating a Patch
Deactivating a patch makes an active patch become inactive.
Procedure
Step 1 Run:
patch deactive
The patch is deactivated.
----End
12.5.3 Checking the Configuration
After a patch is deactivated, you can run the display command to check the patch status.
Procedure
l
----End
Issue 02 (2011-09-10)
all
Run:
display patch-information
Check the patch state.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 Patch Management
313