Checking The Configuration - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
----End

7.2.5 Checking the Configuration

After managing configuration files, you can view the current configuration files and files in the
storage device.
Prerequisite
The configuration of Managing Configuration Files are complete.
Procedure
l
l
l
l
l
----End
Example
Run the
<HUAWEI> display startup
MainBoard:
Configured startup system software:
Startup system software:
Next startup system software:
Startup saved-configuration file:
Issue 02 (2011-09-10)
– If configuration-file is configured, the system checks whether the current configuration
file is the same as the specified configuration file.
– If no parameter is set, the comparison begins with the first lines of configuration files.
current-line-number and save-line-number are used to continue the comparison by
ignoring the differences between the configuration files.
When comparing differences between the configuration files, the system displays the
contents of the current configuration file and saved configuration file from the first different
line. By default, 150 characters are displayed for each configuration file. If the number of
characters from the first different line to the end is less than 150, the contents after the first
different line are all displayed.
NOTE
In comparing the current configurations with the configuration file for next startup, if the
configuration file for next startup is unavailable or its contents are null, the system prompts that
reading files fails.
Run the display current-configuration
[ configuration-instance ] ] | controller | interface [ interface-type [ interface-number ] ] ]
[ feature feature-name [ filter filter-expression ] | filter filter-expression ] or
current-configuration
Run the display startup
Run the dir [ /all ] [ filename ] command to check files saved in the storage device.
Run the display saved-configuration
the autosave function, including the status of the autosave function, time for autosave check,
threshold for the CPU usage, and period during which configurations are unchanged (when
the period expires, configurations are automatically saved).
Run the display changed-configuration time
configuration change.
display startup command to check files for startup.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
[ configuration [ configuration-type
[ all | inactive ]command to check current configurations.
command to check files for startup.
configuration command to view configurations of
command to check the time of the last
cfcard:/V600R003C00SPC300.cc
cfcard:/V600R003C00SPC300.cc
cfcard:/V600R003C00SPC300.cc
cfcard:/vrp.cfg
7 Configuring System Startup
display
146