Comparing Configuration Files - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Procedure
l
l
----End

7.2.4 Comparing Configuration Files

You can determine whether the current configuration file is the same as the one for the next
startup operation or a specified one on the router by comparing them.
Context
You can determine whether to specify the current configuration file as the one for the next startup
operation by comparing the current configuration file with the one for the next startup operation.
Procedure
l
Issue 02 (2011-09-10)
Clear the currently loaded configuration file.
Run the reset saved-configuration
file.
– If the configuration file of the router used for the current startup is the same as that used
for the next startup, running the
the configuration files. The router will uses the default configuration file for the next
startup.
– If the configuration file of the router used for the current startup is different from that
used at the next startup, running the
configuration file used for the current startup.
– If the configuration file of the router used for the current startup is empty, the system
will prompt you that the configuration file does not exist after you run the
configuration command.
CAUTION
l After the contents of a configuration file are cleared, the empty configuration file with
the original file name is left.
l If you do not run the
specify a new correct configuration file, or do not run the
configuration file after the configuration file is cleared, the router will use the default
configuration file at the next startup.
l Exercise caution when running this command. If necessary, do it under the guidance of
Huawei technical support personnel.
Clear the inactive configurations of the boards that are not installed in slots.
1. Run the system-view
2. Run the clear inactive-configuration slot
configurations of the boards that are not installed in slots.
Run:
compare configuration
number ]
The current configuration is compared with the configuration file for next startup.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
command to clear the currently loaded configuration
reset saved-configuration
reset saved-configuration
startup saved-configuration
command to enter the system view.
[ configuration-file ] [ current-line-number save-line-
7 Configuring System Startup
command will clear both
command will clear the
configuration-file command to
save command to save the
command to clear the inactive
reset saved-
145