Quidway NetEngine80
Configuration Guide - Basic Configurations
Figure 2-4 Setting the port communication parameters
Power on the router to perform a self-check and the system performs automatic configuration.
When the self-check ends, you are prompted to press Enter until a command line prompt
such as
Enter the command to check the running status of the router or configure the router.
Enter "?" for help.
For details, refer to the following chapters.
----End
2.5.2 Example for Logging In Through Telnet
Networking Requirements
You can log in to the router on other network segments through the PC or other terminals to
perform remote maintenance.
Issue 04 (2009-12-20)
appears.
Quidway
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Establishment of the Configuration Environment
2-9