Configuring The Source Address Of Ftp Server; Enabling The Ftp Server; Configuring The Timeout Period - Huawei V300R005 Configuration Manual

8 FTP, TFTP and XModem
No.
3
4
5
6

8.2.2 Configuring the source address of FTP server

Do as follows on the router that serves as the FTP server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ftp server-source {-a source-ip-address | -i { interface-name | interface-type
interface-num } }
The source address of FTP server is started.
----End

8.2.3 Enabling the FTP Server

Do as follows on the router that serves as the FTP server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ftp server enable
The FTP server is started.
----End

8.2.4 Configuring the Timeout Period

Do as follows on the router that serves as the FTP server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
8-4
Procedure
Configuring the Timeout Period
Configuring the Local Username and the Password
Configuring Service Types and Authorization Information
Checking the Configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway NetEngine80
Configuration Guide - Basic Configurations
Issue 04 (2009-12-20)