Maintaining the electrical components
Warning: Electrical Hazard
To prevent potential injury to yourself and damage to the instrument, switch
OFF all instruments in the system and disconnect them from the line power
supply before you perform the procedures described below.
Parts that may be serviced by the user
The only parts that you should attempt to maintain are those described below.
The electronic components in the instrument do not contain any parts which you
can maintain yourself. If there is a problem, contact your local PerkinElmer
office.
If any fuses blow frequently or if the automatic circuit breaker switch is activated
frequently, contact your local PerkinElmer office for advice.
0993-5255
System Maintenance
W2.3
4-7