Table of Contents
Advertisement
Safety/Regulatory Information
Use only fuses with the required current rating and of the specified type for
replacement.
Do not use makeshift fuses or short-circuit the fuse holders.
Whenever it is likely that the instrument is no longer electrically safe for use,
make the instrument inoperative and secure it against any unauthorized or
unintentional operation.
The instrument is likely to be electrically unsafe when it:
Note: The spectrometer is provided with an operational on/off switch and with
a circuit breaker.
The operational on/off switch turns the instrument on and off, but it does not
disconnect the instrument from the line power supply.
The circuit breaker functions as a 'disconnecting device' and disconnects the
instrument entirely from the line power supply.
Further information on these two switches is provided in 'Switches and
connectors on the spectrometer' starting at page 7-6.
1-6
Shows visible damage.
–
Fails to perform the intended measurement.
–
Has been subjected to prolonged storage under unfavorable conditions.
–
Has been subjected to severe transport stresses.
–
0993-5255
Hide quick links:
Advertisement
Table of Contents
