Electromagnetic Compatibility (Emc) - PerkinElmer AAnalyst 700 User Manual

Safety/Regulatory Information

Electromagnetic compatibility (EMC)

European Union (EMC Directives)
This instrument has been designed and tested to meet the requirements of the
EU Directives 89/336/EEC and 92/31/EEC. It complies with the generic EMC
standard EN 61326-1:1997 Electrical equipment for measurement, control, and
laboratory use – EMC requirements – General requirements.
This instrument has passed the following EMC tests:
Emission of conducted
and radiated noise
EN 55011:96
EN 61000-3-2:95
EN 61000-3-3:95
United States (FCC)
This instrument is classified as a digital device used exclusively as industrial,
commercial, or medical equipment. It is exempt from the technical standards
specified in Part 15 of FCC Rules and Regulations, based on Section 15.103 (c).
Japan (FCC)
This instrument has been tested and found to comply with the limits of a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense. Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
1-28
Electromagnetic compatibility
EN61000-4-2:95
EN61000-4-3:95
EN61000-4-4:95
EN61000-4-5:95
EN61000-4-6:96
0993-5255