Spectrometer System Description
Cooling system
Cooling System
The (optional) cooling system requires a 230 V line
power supply, which is supplied and controlled from the
spectrometer. A special line power cord is provided for
this purpose. Do not connect the cooling system to an
external power source.
You can leave the on/off switch on the cooling system in
the 'on' position since the system is controlled from the
spectrometer.
On/off switch
Accessory ports
Three accessory ports are located on the front panel of the spectrometer behind
slide-up covers. You use these ports to connect certain accessories to the
spectrometer, such as the furnace autosampler. The ports provide the electrical
supply and control signals for operation of the accessories.
7-9
0993-5255