Storing Cylinders - PerkinElmer AAnalyst 700 User Manual

Tomic absorption spectrometer
Table of Contents

Advertisement

Safety/Regulatory Information

Storing cylinders

Store cylinders in accordance with the applicable national, state, and/or local
regulations and standards.
When gas cylinders are stored in confined areas, such as a storage room, make
sure that ventilation is adequate to prevent toxic or explosive accumulations
of gas.
The storage room should be well ventilated and dry. This is particularly
important in confined areas.
Do not store cylinders near elevators, gangways, or in locations where heavy
moving objects may strike or fall against them.
Use and store cylinders away from exits and exit routes.
Locate gas cylinders away from heat sources, including heat lamps.
Compressed gas cylinders should not be subjected to temperatures above
52 °C (125 °F).
Do not allow ignition sources in the storage area and keep cylinders away
from readily ignitable substances such as gasoline or waste, or combustibles
in bulk, including oil.
Store all gas cylinders only in a vertical position, with the valve cap in place,
and fastened securely to an immovable bulkhead or a permanent wall.
If you are storing cylinders outdoors, store them above ground on a suitable
floor where they are protected against temperature extremes (including the
direct rays of the sun).
1-14
0993-5255

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for PerkinElmer AAnalyst 700

Table of Contents