Table of Contents
Advertisement
PerkinElmer Service
Warning: Unauthorized Adjustments and Servicing
Only a PerkinElmer service engineer or similarly trained and authorized person
should be permitted to service the instrument.
Do not attempt to make adjustments, replacements, repairs, or modifications
to this instrument except as described in the documentation supplied with the
instrument.
If the spectrometer system does not function correctly...
Switch off the spectrometer system and make sure that it cannot be operated.
Contact your local PerkinElmer office.
You should only perform the maintenance procedures described in this guide.
For any other maintenance or service contact your local PerkinElmer office to
arrange for a service engineer to visit.
In particular you should only allow a PerkinElmer service engineer or similarly
trained and authorized person to perform any work on:
electrical components inside the instrument;
the gas connections and gas system pneumatics;
the monochromator and all other optical system components.
Before the service engineer arrives:
1. Make sure that the instrument and work area are clean.
2. Empty corrosive solutions from the burner drain vessel.
Then add water to the drain trap to activate the function.
3. Empty the furnace autosampler waste bottle.
Troubleshooting
See the Troubleshooting Guide supplied with the AA WinLab operating system.
This guide includes information on problems that can arise with both the software
and the spectrometer system.
0993-5255
System Maintenance
W1.2
4-3
Hide quick links:
Advertisement
Table of Contents
