Installing And Connecting Lamps; Lamp Holders In The Lamp Compartment - PerkinElmer AAnalyst 700 User Manual

Preparing the System
Figure 3-1. Lamp Holders in the Lamp Compartment

Installing and connecting lamps

HCLs
Note: A hollow cathode lamp must be installed in at least one holder before you
switch on the spectrometer.
1. Open the lamp compartment cover by lifting it at the front and swinging it
back.
2. Slide the Lumina lamp for the required element into the selected lamp holder
and make sure that the integrated socket slides fully home over the receptacle
on the lamp holder.
3. Close the lamp compartment cover.
Lumina hollow cathode lamp
3-8
2
Lamp holders numbered 1 through 8
Sockets for EDLs
2
3 5
4 6
3 5 7
4
6 8
7
8
0993-5255