Regulatory information
IEC 1010 compliance
This instrument has been designed and tested in accordance with EN 61010-
1:1993 (IEC 1010-1): Safety requirements for electrical equipment for
measurement, control, and laboratory use, including Amendments 1 and 2 to this
standard, and EN 61010-2-061:1996 (IEC 1010-2-061:1995): Particular
requirements for laboratory atomic spectrometers with thermal atomization and
ionization.
Electrical protection
Insulation
Class I as defined in IEC 1010-1.
Installation category
This instrument is able to withstand transient overvoltage according to
Installation Category II as defined in IEC 1010-1 and IEC 664.
Pollution degree
This equipment will operate safely in environments that contain nonconductive
foreign matter and condensation up to Pollution Degree 2 as defined in
IEC 1010-1 and IEC 664.
0993-5255
Safety/Regulatory Information
1-27