Skip Part-Program Blocks - Siemens SINUMERIK 840D sl Function Manual

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Skip part-program blocks

When testing or breaking in new programs, it is useful to be able to disable or skip certain part

program blocks during program execution. For this, the respective records must be marked

with a slash.

This function is selected via the operator interface in the "Program control" menu.

The selection sets the following interface signal:

DB21, ... DBX26.0 (skip block selected)

This does not activate the function.

The function is activated via the interface signal:

DB21, ... DBX2.0 (activate skip block)

The "Skip part programs" function remains active during block searches.

Basic Functions

Function Manual, 01/2015, 6FC5397-0BP40-5BA2

Main program/subroutine

Skipping part program blocks

K1: Mode group, channel, program operation, reset response

N40 and N50 during

9.5 Program test

Show Quick Links

Table of Contents

Sinumerik 828d Sinumerik 840de sl