Copying Program Blocks - Siemens SIMATIC S7-1500 Getting Started

Hide thumbs Also See for SIMATIC S7-1500:
Table of Contents

Advertisement

3.2.3

Copying program blocks

Introduction
In the following section, you will insert the program blocks from the
"ProgLib_ColorFillingStation" global library into your project.
Procedure
1. Click on global library "ProgLib_ColorFillingStation".
2. Click the "Master copies" folder and then on "Programm_blocks".
3. Drag-and-drop the program block to be imported from the global library to the "Program
4. Proceed as described in steps 2 and 3 for the other blocks.
Result
The program blocks are inserted in the project folder of the same name.
S7-1500
Getting Started, 05/2014, A5E03981761-AC
blocks" folder.
Software section
3.2 Creating the program
51

Advertisement

Table of Contents
loading

Table of Contents