Specifying The Setpoint Via The Fieldbus - Siemens SINAMICS G120C Operating Instructions Manual

6.3.3

Specifying the setpoint via the fieldbus

Interconnecting the fieldbus with the main setpoint
Figure 6-21
Most standard telegrams receive the speed setpoint as a second process data PZD2.
Table 6- 19
Parameter
p1070 = 2050[1]
p1075 = 2050[1]
SINAMICS G120C converter
Operating Instructions, 07/2015, FW V4.7 SP3, A5E34263257B AC
Fieldbus as setpoint source
Setting the fieldbus as setpoint source
Remark
Main setpoint
Interconnect the main setpoint with process data PZD2 from the fieldbus.
Additional setpoint
Interconnect the additional setpoint with process data PZD2 from the fieldbus.
Advanced commissioning
6.3 Setpoints
177