Transferring The Setting From The Memory Card - Siemens SINAMICS G120C Operating Instructions Manual

Backing up data and series commissioning
7.1 Saving settings on a memory card
7.1.2

Transferring the setting from the memory card

Automatically transferring
Precondition
The inverter power supply has been switched off.
Procedure
Proceed as follows to automatically transfer your settings:
1. Insert the memory card into the inverter.
2. Then switch on the inverter power supply.
If there is valid parameter data on the memory card, then the inverter accepts the data from
the memory card.
Manually transferring
Preconditions
• The inverter power supply has been switched on.
• No memory card is inserted in the inverter.
Procedure with STARTER
Proceed as follows to transfer settings from a memory card to the inverter:
1. Go online and in your drive, select the "Drive Navigator".
2. Select the "Commissioning" button.
3. Select the button to transfer the data from the memory card to the inverter.
288
Operating Instructions, 07/2015, FW V4.7 SP3, A5E34263257B AC
SINAMICS G120C converter