Backing up data and series commissioning
7.3 Saving settings on an operator panel
7.3
Saving settings on an operator panel
You can transfer the inverter settings to the Operator Panel BOP-2 or vice versa, the data
from the BOP-2 to the inverter.
Precondition
The inverter power supply has been switched on.
Inverter → BOP-2
Procedure
To back up the settings on the BOP-2, proceed as follows:
1.
2.
3.
4.
You have backed up the settings on the BOP-2.
298
Go to the menu level "OPTIONS".
In the "OPTIONS" menu, select "TO BOP".
Start data transfer with OK.
Wait until the inverter has backed up the settings to the BOP-2.
Operating Instructions, 07/2015, FW V4.7 SP3, A5E34263257B AC
SINAMICS G120C converter