Siemens SINAMICS G120C Operating Instructions Manual page 46

Installing
4.3 Installing the inverter
Mounting on a mounting rail (TS 35)
Procedure
Proceed as follows to mount the inverter on a mounting rail:
1. Mount the inverter on the top edge of the mounting rail.
2. Using a screwdriver, actuate the release button on the upper side of the inverter.
3. Continue to actuate the release button until the inverter audibly snaps onto the mounting
rail.
Figure 4-7
You have mounted the inverter on a mounting rail.
To remove, actuate the release button and at the same time withdraw the inverter from the
mounting rail.
42
Mounting on a standard mounting rail
You can mount inverters, frame size
FSAA on a TS 35 mounting rail.
Operating Instructions, 07/2015, FW V4.7 SP3, A5E34263257B AC
SINAMICS G120C converter