Appendix
A.6 Connecting the safety-related input
A.6
Connecting the safety-related input
The examples comply with PL d according to EN 13849-1 and SIL2 according to IEC 61508
for the case that all components are installed within one control cabinet.
Figure A-7
Figure A-8
Figure A-9
You can find additional connection options and connections in separate control cabinets in
the Safety Integrated Function Manual, see Section: Further information on your inverter
(Page 409).
402
Connecting a sensor, e.g. Emergency Stop mushroom pushbutton or limit switch
Connecting a safety relay, e.g. SIRIUS 3TK28
Connecting an F digital output module, e.g. SIMATIC F digital output module
Operating Instructions, 07/2015, FW V4.7 SP3, A5E34263257B AC
SINAMICS G120C converter