Mounting The Braking Resistor - Siemens SINAMICS G120C Operating Instructions Manual
Low voltage inverter
Hide thumbs
Also See for SINAMICS G120C:
- Operating instructions manual (478 pages) ,
- Compact operating instructions (92 pages) ,
- Getting started (68 pages)
Table of Contents
Advertisement
4.7
Mounting the braking resistor
Mounting position
Risk of burns due to touching hot surfaces
During operation and for a short time after the frequency converter shuts down, the surface
of the device can reach a high temperature. Touching the surface of the converter can
cause burns.
• Do not touch the device during operation.
• After shutting down the converter, wait for the device to cool down before touching it.
Mounting instructions
Mount the resistor on a heat resistant surface with a high thermal conductivity.
Do not cover the ventilation openings of the braking resistor.
SINAMICS G120C converter
Operating Instructions, 07/2015, FW V4.7 SP3, A5E34263257B AC
CAUTION
4.7 Mounting the braking resistor
Installing
53
Advertisement
Table of Contents
