Procedure
To connect the inverter and its components, proceed as follows:
1. Install the appropriate fuses:
2. Connect the inverter and its components.
The plugs for connecting the line supply,
motor, and braking resistor can be found on
the lower side of the inverter.
3. If an EMC-compliant installation is required,
you must use shielded cables. See also
Section: EMC-compliant installation
(Page 32).
You have now connected the inverter and its components.
SINAMICS G120C converter
Operating Instructions, 07/2015, FW V4.7 SP3, A5E34263257B AC
Installing
4.8 Connecting the inverter
61