Setpoint Interfaces - Siemens SIMODRIVE 611A Installation And Planning Manual

12.94
07.94

Setpoint interfaces

Definitions:
Table 4-1 Main setpoint–supplementary setpoints
Mode Setpoint
Main setpoint
Speed controlled Speed controlled
Supplementary
setpoint
Main setpoint
Current controlled Current controlled
Supplementary
setpoint
Slave, I controlled Main setpoint
Current setpoint Current setpoint
Supplementary
input
setpoint
Main spindle drive
Main setpoint
option o tion
Supplementary
Main spindle drive
setpoint
operation
Main spindle drive Main setpoint
option option
Supplementary
C axis
setpoint
Table 4-2 Motor direction of rotation for a positive setpoint and S2.1 = ON
Mode Term.56/14
Speed controlled S eed controlled ccw ccw
Current controlled Current controlled
When viewing the motor shaft, drive end
Siemens AG 1997 All Rights reserved
SIMODRIVE 611A Installation and Start–Up Guide/IAA/–04.97 Edition
Optimal, taking into account the setpoint input characteristics
X
Possible
Not permissible, and to some extent also not possible
Term.56/1 Term.24/2
4 0
X
X
X
X
X
Term.24/20 Term.22
R16/18 cw
cw cw
R17/18 ccw
R16/18 cw
cw cw
R17/18 ccw
4 Setpoint interfaces
Feed modules (VS)
Int. Int. Socket
setpoint setpoint NZ
term.22 term.23
X X X
X
X X
Term.23 Socket NZ
R19/22 cw
ccw ccw
R21/22 ccw
R19/22 cw
R21/22 ccw
VS
Term.258
X
Master/slave
term.258
cw
(slave)
1-111