BOP-2 → inverter
Procedure
To transfer the settings to the inverter, proceed as follows:
1.
2.
3.
4.
5.
6.
7.
You have transferred the settings to the inverter.
SINAMICS G120C converter
Operating Instructions, 07/2015, FW V4.7 SP3, A5E34263257B AC
Go to the menu level "OPTIONS".
In the "OPTIONS" menu, select "FROM BOP".
Start data transfer with OK.
Wait until the inverter has written the settings to the memory card.
Switch off the inverter power supply.
Wait until all LEDs on the inverter are dark.
Switch on the inverter power supply again.
Your settings become effective after switching on.
Backing up data and series commissioning
7.3 Saving settings on an operator panel
299