Installing
4.7 Mounting the braking resistor
Clearances to other devices
Figure 4-12
Keep shaded areas free of any devices and components.
Dimensions and drilling patterns
Frame size AA, frame size A: 0.55 kW ... 1.5 kW
Dimensions [mm]
Drilling pattern [mm]
54
Minimum clearances for the braking resistor when mounting on a flat surface and for
wall/panel mounting
Fixing:
4 × M4 screws
4 × M4 nuts
4 × M4 washers
tightening torque 3 Nm
Operating Instructions, 07/2015, FW V4.7 SP3, A5E34263257B AC
SINAMICS G120C converter