Table of Contents
Advertisement
D
E
4
AILY
URO
Figure 57
Take out the screws (2) and the brackets (3) fixing the
electro-injectors (1) to the cylinder overhead.
Figure 58
Using tool 99342153 (1) extract the electro-injectors (2)
from the overhead.
Figure 59
Remove screw (1) and nut (3), then remove pipe (2).
Take oil dipstick pipe (4) out of the engine base.
Print 603.93.651
Figure 60
108171
Loosen clamp (6), then disconnect fuel pipe (5) from
high-pressure pump (7).
Remove screw (3) securing pipe (2) retaining bracket (4) to
the inlet manifold.
Disconnect pipe (2) from hydraulic accumulator (1) and
high-pressure pump (7).
Figure 61
108172
Take out the screws (1) and remove the hydraulic
accumulator (2).
Figure 62
108173
Remove screws (4), then disconnect low-pressure pipes (5)
from bracket (3).
Remove coupling (1), then disconnect pipes (5) from
high-pressure pump (2).
71
F1A ENGINE
108174
108175
108176
Base - March 2006
Advertisement
Table of Contents
