Table of Contents
Advertisement
226
F1C ENGINE
Figure 85
Secure water pump shaft (5) by means of an Allen wrench
(3) and a special lever. Use a suitable wrench (4) to remove
nut (2) securing hub (1) to shaft (5).
NOTE
Slacken the nut (2) anticlockwise because its
threading is left-handed.
Figure 86
Disassemble hub (5) and pulley (4).
Disconnect electric cable (1) from the retaining clip, then
remove nuts (2) and take electromagnet (3) off water pump
(6).
Figure 87
Remove screws (1), then take water pump (2) off.
Remove screw (3), then take oil dipstick pipe (4) out of front
cover (5).
Base - March 2006
Figure 88
107724
Remove the screws (3) and the cover (4). Take off the snap
ring (2). Pull out the centrifugal filter (1).
NOTE
The centrifugal filter (1) and the seal ring of the
cover (4) must be changed at every removal.
Figure 89
107725
Stop the rotation of the engine flywheel (2) by means of tool
99360306 (1).
Figure 90
107726
Remove the screw (2) and the damper pulley (1).
D
E
4
AILY
URO
107727
107728
88265
Print 603.93.651
Advertisement
Table of Contents
