Table of Contents
Advertisement
26
AXLE 5818
520610
OVERHAULING AXLE 5818
The overhauling operation different from the ones
concerning the axle 5817 are described below.
To remove and refit axle 5818, proceed in a similar manner
as for axle 5817.
Adjustment values, tightening torque values and equipment
are those specified in this chapter.
520620
Wheel hub removal and refitting
Removal
Figure 3
Free the screws (1) securing the wheel rim.
Lift the vehicle and put the stands (3) under the structural
members in a forward position.
Unscrew the nuts (1), take off the protection (2) and remove
the entire wheel.
Remove the braking gaskets as described in the "Brake"
section, or remove the mounting with the brake caliper as
described for axle 5817.
Figure 4
Stop flange (2) rotation by means of a proper lever (3), then
remove screws (4) and take flange (3) and brake disc (1) off
the wheel hub.
NOTE
Check the conditions of the brake disc and the
braking gaskets, as described in the "BRAKING
SYSTEM" section.
Base - March 2006
Figure 5
Lift the deformation (⇒) of the nut (1) and unscrew this with
a suitable wrench.
19603
Figure 6
Extract the wheel hub (1) from the pin of the stub axle (2).
109051
NOTE
If any trouble is found with the wheel hub or
bearing, the assembly needs to be replaced since
the parts are not supplied as single spares.
When putting aside the wheel hub, take care not
to damage the phonic wheel.
D
E
4
AILY
URO
108367
109052
Print 603.93.651
Advertisement
Table of Contents
