Table of Contents
Advertisement
D
E
4
AILY
URO
Figure 48
Re-attach the starting motor to the gearbox case front cover
by tightening the screws (1) to the specified torque.
Figure 49
Secure crossbar (1) to the gearbox and to the chassis by
tightening the screws to the specified torque.
Figure 50
Fit the clutch actuator (1) engaging tip into the special fork slot,
taking care not to touch it straight with your hands.
Print 603.93.651
Figure 51
102163
Secure clutch actuator (1) to the gearbox by means of the four
screws (2), then tighten to the specified torque.
Figure 52
102149
Connect connector (1) to the clutch actuator.
Figure 53
102165
Secure the gearbox cable by means of strap (1).
6 S 400 A O.D. TRANSMISSION
Base - March 2006
115
102141
102167
102168
Advertisement
Table of Contents
