Table of Contents
Advertisement
20
REAR AXLE NDA RS
Figure 10
Unscrew securing screws (2) and take out half shaft
comprehensive of unit-bearing support (1), bearing, ring nut
and metal sheet guard (3).
Figure 11
Tighten half shaft (1) in a vice.
Remove denting (→) of ring (2) engaging in ring nut (3).
Figure 12
Using wrench 99355184 (1), unscrew ring nut (2) checking
bearing (3) to half shaft (4).
Base - March 2006
Figure 13
107986
Properly arrange half shaft (1) on hydraulic press and take out
bearing (2) together with support (3). Using extractor
99348001 (4).
Figure 14
107987
Unscrew screws (2) securing metal sheet guard (1) to
support (3). Pull guard apart from support.
107988
D
E
4
AILY
URO
107989
107990
Print 603.93.651
Advertisement
Table of Contents
