D
E
4
AILY
URO
WHEEL NUT TIGHTENING SEQUENCE
Figure 86
AXLE TIGHTENING ORDER
Tighten the screws at the specified torque in the order
shown.
Print 603.93.651
OVERHAULING PARKING BRAKE
Dismantling parking drum brake
Figure 87
52747
Release shoe (1) return springs (2 and 5). Save the adjusting
device (3).
Remove retaining brackets (4 and 6) and detach shoes (1).
Figure 88
Remove shoe retaining pins (3) and parking brake wire
hitching device (4).
NOTE
Disjoin support (1) and withdraw sensor (2) to
remove ABS sensor (2).
To reassemble the sensor (2), push it as far as it will
go inside support (1) and fasten the latter to the rear
axle.
HYDRO-PNEUMATIC SYSTEM - BRAKES
73
45048
45049
Base - March 2006