Iveco daily euro 4 Repair Manual page 285

D E 4
AILY URO
Figure 214
Lubricate the seal rings (1 and 2) with engine oil and fit them
on the support (3).
Figure 215
Fit the support (1) and drive in the nuts (2), then tighten them
to the prescribed torque.
Fit the stem (3).
Figure 216
Stop the stem rotation (2) of the hydraulic power steering
pump by inserting in the latter the tool (3) and fastening the
tool on the support (1) by means of the screws (4).
Print 603.93.651
Figure 217
88348
Fit the gear (1) on the stem (3) of the hydraulic power
steering pump.
Drive in the screw (2) without locking it.
Figure 218
88279
Lubricate the new seal rings (1 and 2) with engine oil and fit
them on the support (3).
Figure 219
88277
Fit the support (1), drive in the nuts (2) and tighten them to
the prescribed torque.
Fit the control stem (3) of the high pressure pump.
257
F1C ENGINE
88278
88349
88276
Base - March 2006