Iveco daily euro 4 Repair Manual page 401

D E 4
AILY URO
Figure 52
Using bridge 99341003 (1), screw stays 99341019 (2), grips
99341025 (4) and clamp 99341015 (3), take out the 2
(7), spacer (6) and bushing (5).
NOTE Force of extraction of the bushing (4) 40 kN.
Figure 53
Take out the synchronizer ring (4), middle ring (3), ring (2) and
roller bearing (1).
Figure 54
Remove the sleeve (2) for engaging 1
(1) and, taking care as the plugs (5) come out with their relative
balls (3) and springs (4), recover them.
Print 603.93.651
76010
nd
gear
51417
51418
st nd
-2 gear from the hub
Figure 55
Using the bridge 99341003 (1), ties 99341012 (2) and clamp
99341015 (3), extract the 1
ring (7), middle ring (8) and ring (9), hub (5) and bushing (4).
Remove the roller bearing (10).
NOTE Force of extraction of the bushing (4) 40 kN.
Figure 56
Turn over the main shaft (1). Take out the spacer ring (2) and
th
remove the 5 gear (3).
Figure 57
Remove the half roller bearings (1), the synchronizer ring (3)
and the retaining ring (4) holding the hub (2).
5 S 300 TRANSMISSIONS
st
gear (6), with the synchronizer
Base - March 2006
35
51419
51420
51421