Table of Contents
Advertisement
D
E
4
AILY
URO
Figure 68
Remove screw (2), then take off pipe union (1).
Remove screws (3) securing elbow (4) to bracket (5).
Figure 69
Remove coupling (5).
Disconnect oil pipe (4) from the cylinder head coupling and
turboblower (3) coupling.
Remove nuts (2), then take turboblower (3), together with
its gasket, off exhaust manifold (1).
Figure 70
Remove nuts (5) and spacers (4), then take off exhaust
manifold (1) together with its gasket, complete with pipe (2)
and elbow (3).
Print 603.93.651
Figure 71
108182
Take out the screws (1) and remove the overhead (2).
Figure 72
Take off the gasket (1) and remove the hydraulic tappets
together with the rocker arms (2).
108183
Figure 73
Take out the screws (1) and remove the cylinder head (2).
NOTE
Check the protrusion of the pistons as described
108184
under the relevant heading to check the possibility
of facing the crankcase if it has deformed.
73
F1A ENGINE
108185
75269
75270
Base - March 2006
Advertisement
Table of Contents
