Stabilizer Bar - Iveco daily euro 4 Repair Manual

Mechanical electric/electronic
Table of Contents

Advertisement

D
E
AILY
URO 4
528030

STABILIZER BAR

Removal
Figure 59
FRONT STABILISER BAR
Vehicles 35C - 40C - 45C - 50C
Unscrew the screws (2) fixing the half-brackets (3) and
remove the stabilizer bar (1) from the vehicle, recovering the
rubber plugs (4).
Check that the bushings and/or elastic elements are
not worn or deteriorated; if they are, replace the
relevant part.
Refitting
To fit it back on, perform the steps carried out for
removal in reverse order, keeping to the prescribed
tightening torques.
Print 603.93.651
500910
FRONT SHOCK ABSORBERS
Removal
Figure 60
FRONT SHOCK ABSORBER
Vehicles 35C - 40C - 45C - 50C
Set the vehicle on level ground.
Lock the rear wheels with scotches, remove the wheel rim
75000
guards and loosen the screws or nuts fixing the wheel.
Lift the front of the vehicle and rest the chassis frame on
supports.
Take out the screws or nuts fixing the wheel and remove
them with tool 99321024.
Unscrew the top and bottom bolts (2), then remove the
shock absorbers (1) from the vehicle.
Check that the bushings and/or elastic elements are
not worn or deteriorated; if they are, replace the
relevant part.
Using a suitable instrument, check the efficiency of the shock
absorbers.
Refitting
To fit it back on, perform the steps carried out for
removal in reverse order, keeping to the prescribed
tightening torques.
FRONT MECHANICAL SUSPENSIONS
Base - March 2006
39
75001

Advertisement

Table of Contents
loading

Table of Contents