Iveco daily euro 4 Repair Manual page 251

D E 4
AILY URO
Figure 67
Use tool 99360076 (1) to take oil filter (4) off heat exchanger
(5).
Remove screws (2) and (6), then disconnect pipe (3) from
heat exchanger (5).
Figure 68
Remove the screw (6) and the low pressure pipes (5) from
the bracket (4).
Slacken the pipe unions (1 and 3) and remove the low
pressure pipes (5) from the high pressure pump (2).
Figure 69
Remove screws (1), then take heat exchanger (2), with its
respective gasket, off the engine base.
Print 603.93.651
Figure 70
Remove screws (5) with spacers (4), then take off high-pressure
107709
pump (3).
Remove screws (6) with spacers (7), then take off power
steering pump (8).
Remove screws (1), then take off power steering tank support
(2).
Figure 71
107710
Cut elastic belt (1), if any, due to its being unable to be reused.
Remove screws
compressor (4) from support (2).
Figure 72
107711
Remove the screws (4) and take off the support (3).
Remove the screw (1) and the fixed backstand (2).
F1C ENGINE
(3), then remove air-conditioner
223
107712
107713
88252
Base - March 2006