Hill Holder (Function Only Available To Vehicles With Esp8 Braking System); Functional Features - Iveco daily euro 4 Repair Manual

D E 4
AILY URO
HILL HOLDER (FUNCTION ONLY AVAILABLE TO VEHICLES WITH ESP8 BRAKING
SYSTEM)

Functional features

Figure 5
- It prevents the vehicle from moving either uphill with 1st gear or downhill with reverse gear after releasing brake pedal.
- It keeps that brakes pressure which was applied by driver's foot.
- Brakes pressure is kept up to 2 s. This time is sufficient to driver to displace his/her foot from brake pedal to accelerator
pedal in order to perform start operation in an easier way.
- 2-second safety concept is applied in order to prevent driver from going out of the vehicle as if it was parked.
- If the vehicle is skidding with its wheels locked, the brakes are released in order to maintain its stability.
Activation:
- Stopped uphill/downhill (>2% slope)
- Press brake pedal
- 1st gear (uphill) reverse gear (downhill)
Print 603.93.651
6 S 400 A O.D. TRANSMISSION
Deactivation:
- Start
- shifting from 1st to reverse gear (uphill) or from
reverse gear to neutral (downhill)
- clutch shutting
- 2 sec. after releasing brake pedal
- with hand brake engaged (signal from ESP 8 central
unit).
97
108869
Base - March 2006