Table of Contents
Advertisement
82
6 S 400 O.D. TRANSMISSION
Figure 94
1
Mount the 3rd gear (1).
Figure 95
1
With a hydraulic press, mount the 6
approx. 170°C.
Check the end float of the 3
mm.
Figure 96
With a hydraulic press, mount the 5
approx. 170°C.
Base - March 2006
th
gear (1) pre-heated to
rd
gear (2). It should be 0.15÷0.40
th
gear (1) pre-heated to
Figure 97
Mount the retaining ring (1) whose thickness produces null
end float in its seat.
51974
Figure 98
Heat the internal rings (1-3) of the tapered roller bearings to
a temperature of approx. 80°C and, with a suitable punch (1),
mount them on the transmission shaft (2).
51975
Mounting the main shaft
NOTE
Mount the synchronizer rings on their respective gears
according to the marks made during disassembly or
when checking in the case of replacement.
Figure 99
90221
Tighten the main shaft (1) and position the roller bearing (2)
on it.
D
E
4
AILY
URO
90222
90223
51973
Print 603.93.651
Advertisement
Table of Contents
