Table of Contents
Advertisement
50
REAR AXLE NDA RG
Figure 14
If it is necessary to replace the pins of the wheel hub (1),
before mounting the new ones, check that the mating surface
of the pin head is free from burrs, dross and blisters.
The pins should be driven in by applying a load on their head
no greater than 2000 kg.
After driving them home, check that the pins are perfectly in
touch with the hub: maximum orthogonal tolerance 0.2 mm.
Figure 15
Stand the bearing of the wheel hub (2) on a special mounting
that permits rotation. With a magnetic dial gauge (1) check
the off-centring of the brake disc on both sides.
Centering error must not exceed 0.1 mm.
Base - March 2006
Figure 16
44618
Mount the inserter 99370497 (2) on the sleeve.
Lubricate the sleeve with TUTELA W90/M-DA oil and key
the wheel hub (1).
44619
D
E
4
AILY
URO
44621
Print 603.93.651
Advertisement
Table of Contents
