Upper Steering Gear Shaft Removal; For Vehicles Equipped With Air-Bag; For All Vehicles - Iveco daily euro 4 Repair Manual

D E 4
AILY URO
541415

Upper steering gear shaft removal

Figure 15
Disconnect the battery (2) cables (1-3) first the negative cable
(1) then the positive one (3) and insulate them taping the
terminals.

For vehicles equipped with Air-Bag

Follow the safety standards given in the relevant chapter and
wait for 10 minutes before proceeding.
Figure 16
For vehicles without Air-Bag, remove the pressure-fit cover
(2) on the steering wheel.
For vehicles with Air-Bag, turn the steering wheel and position
it as shown in the figure, in order to easily reach the screws (1
and 3) and remove them.
Print 603.93.651
Figure 17
62107
- Lift the Air-Bag module (1) in order to disconnect
connector (2);
- Remove the Air-Bag module (1) from the steering wheel
(3).
After removal, non-activated Air-Bag modules must
be stored with plate laying on the surface in a suitable
!
key-locked cabinet.

For all vehicles

Remove fixing nut (4).
Figure 18
62108
Set front wheels in straight running and mark (→) steering
wheel assembly position (1) on upper steering gear shaft (2)
Remove the steering wheel (1) from the shaft (2).
For vehicles with Air-Bag, make sure not to extract or damage
coil device cable (3).
23
STEERING GEAR
62108
62109
Base - March 2006