Table of Contents
Advertisement
20
HYDRO-PNEUMATIC SYSTEM - BRAKES
C Type re-flanging
Figure 6
Fit nut (2) and ring (3) over the pipe (1).
Figure 7
Fit union fitting (2) and tighten so that ring (3, Figure 6) is locked
over the pipe (1).
Bending rigid pipes
Figure 8
Fit tool (1) 99386523 and select components (2) and (3)
according to the diameter of the pipe to be bent.
Base - March 2006
Figure 9
31976
Position pipe (1) in tool (3) and bend the pipe by acting on lever
(2).
Figure 10
31977
To remove the pipe (2) from the tool (3) use lever (1).
Cutting rigid pipes
Figure 11
31978
Position pipe (2) in tool (3) 99386523 and tighten screw (1).
By holding the pipe (2) still, rotate the tool (3) until the pipe
has been completely cut.
D
E
4
AILY
URO
31979
31980
31981
Print 603.93.651
Advertisement
Table of Contents
