Table of Contents
Advertisement
20
FRONT MECHANICAL SUSPENSIONS
Assembly
NOTE
The flexible bushings of the bottom suspension arms
are equipped with metal reinforcement.
Figure 15
Insert the bushing (2) into the suspension arm (1).
Apply the parts (3 - 4 - 5 - 6) of the tool 99374179, as shown
in the figure.
Screw on the nut (6) to make the bushing (2) flush with the
suspension arm (1).
Remove the parts of tool 99374179.
Figure 16
Insert the bushing (7) into the suspension arm (1).
Apply the parts (2 - 3 - 5 - 6) of the tool 99374179, as shown
in the figure.
Screw on the nut (6) to make the bushing (7) flush with the
suspension arm (1).
Remove the parts of tool 99374179.
Base - March 2006
Figure 17
Insert the spacer (2) into the bushing (1).
Apply the parts (3 - 4 - 5) of the tool 99374179, as shown
in the figure.
Screw on the nut (5) to fully insert the spacer (2) into the
flexible bushings (1).
52326
Refitting
Figure 18
52327
To refit the bottom (5) and top (1) suspension arms to the
crosspiece (2), reverse the steps described for removal
tightening the nuts (6 - 3) for the fixing screws (4 - 7) to the
prescribed torque.
NOTE
Self-locking nuts, once removed, must be replaced
with new ones.
D
E
AILY
URO 4
52328
74994
Print 603.93.651
Advertisement
Table of Contents
