Table of Contents
Advertisement
D
E
4
AILY
URO
Disassembling the drive input shaft
Figure 69
1
To replace the cog-wheel (1), use the same general tools for
disassembly as for assembly, heat it to a temperature of 80ºC.
Disassembling the transmission shaft
Figure 70
Take out the retaining ring (1) holding the 5
Figure 71
Using general tools, extract the internal ring (2) of the rear
tapered roller bearing from the transmission shaft (1).
Print 603.93.651
Figure 72
51956
Using a hydraulic press, extract the 6th gear (2) and the
internal ring (1) of the tapered roller bearing from the
transmission shaft.
Figure 73
90217
Using a hydraulic press, remove the 5th gear (2) from the
th
gear (2).
transmission shaft (1).
Figure 74
90216
Remove the 3rd gear (1) and the roller bearing (2).
Remove the synchronizer ring (3). Remove the retaining ring
(5) securing the hub (4).
6 S 400 O.D. TRANSMISSION
1
1
1
75
51959
51960
51961
Base - March 2006
Advertisement
Table of Contents
