Table of Contents
Advertisement
10
TRANSMISSION
GEAR CONTROL
Flexible cable replacement
Removal
Figure 3
Place the vehicle on a pit or auto lift.
Act from under the vehicle to disconnect the jointed heads of:
-
selection cable (2, max. pull-out load: 250 N - max. pull-in
load: 60 N) from lever (1);
-
engagement cable (4, max. pull-out load: 100 N - max.
pull-in load: 80 N) from lever (1).
Figure 4
Base - March 2006
Act from the upper part of the gearbox unit and use a suitable
screwdriver to open out flexible cable fins (6 and 7) so that the
pawls are disengaged from bracket (5).
Proceed as follows, by acting from inside the cab (see figure
4):
-
unscrew and remove knob (1);
-
remove protection boot (2);
-
remove the fastening screws, then take covering (3) off;
-
remove glove compartment (4);
-
remove the fastening screws, then take lower central
covering (5) off.
108850
D
E
4
AILY
URO
108851
Print 603.93.651
Advertisement
Table of Contents
