Table of Contents
Advertisement
Figure 19. Cover removal
If you have other devices to install or remove, do so now. Otherwise, go to "Completing the installation"
on page 73.
Removing the air baffle
Use this information to remove the air baffle.
To remove the air baffle, complete the following steps:
Step 1.
Read the safety information that begins in "Safety" on page v and "Installation guidelines" on
page 31.
Step 2.
Turn off the server (see "Turning off the server" on page 22) and all attached peripheral devices.
Disconnect all power cords; then, disconnect all external cables from the server.
Step 3.
Remove the top cover (see "Removing the server top cover" on page 33).
Step 4.
Lift the air baffle from the server and set it aside.
Attention: For proper cooling and airflow, replace the air baffle before you turn on the server.
Operating the server with the air baffle removed might damage server components.
34
Lenovo System x3530 M4 Installation and Service Guide
Advertisement
Table of Contents
Troubleshooting
