Table of Contents
Advertisement
Figure 168. Power interposer card assembly removal (with advanced remote battery holder)
Step 12. If you are instructed to return the power interposer card, follow all of the packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Replacing the power interposer card assembly
Use this information to replace the power interposer card assembly.
To install the power interposer card assembly, complete the following steps:
Step 1.
Read the safety information that begins in "Safety" on page v and "Installation guidelines" on
page 31.
Step 2.
Reconnect the power cable to the power interposer card.
Step 3.
Align the screw holes on the power interposer card with the screw holes on the chassis; then,
install the screws to secure the power interposer card to the chassis.
.
Chapter 6
Removing and replacing structural parts
257
Advertisement
Table of Contents
Troubleshooting
