Lenovo x3530 M4 Installation And Service Manual page 287

Figure 191. Tilt the system board
Step 12. Gently push the external input/output connectors toward to the fan cage as much as possible.
Figure 192. Push the system board toward to the fan cage
Step 13. Grasp the system board on both the cable clip near the microprocessor 2 and PCI riser card
connector 1. Then, slightly lift the system board to create a small angle of elevation by leaning the
edge against the partition of the power supply between the system board and chassis.
.
Chapter 6 Removing and replacing structural parts
273