Removing A Cd/Dvd Drive - Lenovo x3530 M4 Installation And Service Manual

Step 2. Touch the static-protective package that contains the new drive to any unpainted metal surface on
the server; then, remove the drive from the package and place it on a static-protective surface.
Step 3. Gently push the drive assembly into the drive bay until the drive clicks into place.
Figure 118. 3.5-inch simple-swap hard disk drive installation
Figure 119. 2.5-inch simple-swap hard disk drive installation
Step 4. Reinstall the filler panel that you removed
Step 5. Turn on the peripheral devices and the server.

Removing a CD/DVD drive

Use this information to remove a DVD drive.
To remove a CD/DVD drive, complete the following steps:
Step 1. Read the safety information that begins in "Safety" on page v and "Installation guidelines" on
page 31.
Step 2. Turn off the server (see "Turning off the server" on page 22) and all attached peripheral devices.
Disconnect all power cords; then, disconnect all external cables from the server.
Step 3. Remove the top cover (see "Removing the server top cover" on page 33).
206
Lenovo System x3530 M4 Installation and Service Guide