Table of Contents
Advertisement
Figure 62. Cover installation
Step 3.
Slightly slide the cover toward the front of the server until the inset tabs start to engage on the
server; then, tighten the thumbscrews to secure the cover to the chassis.
Step 4.
Install the server into the rack enclosure and push the server into the rack until it clicks into place.
Connecting the cables
The following illustrations show the locations of the input and output connectors of the server.
The following illustration shows the locations of the input and output connectors on the front of the server.
Figure 63. Front of server
The following illustration shows the locations of the input and output connectors for both non-hot-swap
and hot-swap power supplies respectively on the rear of the server.
76
Lenovo System x3530 M4 Installation and Service Guide
Advertisement
Table of Contents
Troubleshooting
